14MZ Radio System FAQ
I am trying to send my model set up to a friend but can't copy and paste or even view anything in the model folder. I use Windows XP and "normal" programs. What should I do to send him the files?
Have you copied the models from your transmitter to your CF card yet? If not go into your Linkage menu, from there pick Model Select and when you are there, look at each model. Above the picture in the middle of the screen, you will see the word "Location". At this point you will most likely see a small picture of your transmitter. If you touch this picture it will change to a picture of a Data Pack, and have the initials DP on it in red.
Touch this again so that it shows the transmitter, after you have picked the model you want, touch "Copy" in the lower right-hand corner. This will bring you to a screen that will show the model you want to copy, an Arrow pointing to a screen with either a picture of your transmitter or the DP symbol on it.
Just touch this last picture to make sure it says "DP", touch the "Copy" symbol in the middle. You will then be asked Yes or No, just touch Yes, and this will save it to your CF card.
To download a model from your CF card INTO your transmitter, you will just do the reverse of this.
At the Model Select screen you will touch "DP" as the location, this will show you every model you have on your CF card, you can then select one, but this time at the second screen where you copy, you will select the picture of your transmitter, NOT the DP symbol. This will copy into your transmitter what was on the CF card.
Now, if you are not finding any models on your PC in your CF card, you will need to go into your Drive and look for the "Sandisk" or portable Drive that you use for your CF card. It will most likely say "Removable Disk". When you CF card is inserted into the Portable Drive click on this file and you will see a series of things in here. Click on the file folder that says MODEL, there you should see all of your models that you have downloaded from your transmitter onto your card.
After you have saved the models to the card, then opened the folder to view what you have there, when you find one that you want to email, just drag the icon to your desktop and when you send the email, send this icon as an attachment.
