14MZ Radio System FAQ
I have tried using both my Throttle Jockey, and my Revlock on my 14MZ but its not working. Do you have any tips for me or can you help me set these up even though they are not your products?
Neither the TJ nor the Revlock will work with the 14MZ and the R5014DPS receiver in the default 14MZ configuration of having the Governor function mapped to channel 7. You must switch the governor function to any of the following channels: 4, 5, 6, 10, 11, or 12. If not using the Governor function, then whatever you are using on the transmitter for RPM control must be mapped to one of the above channels on the receiver.
Also for eCCPM set ups, it is best to switch the pitch servo to one of the channels in the same group as the elevator and aileron channels, such as group 1, 2, 3, 7, 8, 9, and DG1 or 4, 5, 6, 10, 11, 12, and DG2.
